You come home after a long day to find that your keyless Schlage lock won’t open. You try your keys, but they won’t turn either. What do you do? Don’t worry, we have answers!
First, don’t panic! This is a situation that can be resolved relatively easily. Let’s take a look at some causes of the Schlage keyless door lock that just spins, and some possible solutions.
How to install a Schlage keyless door lock
The Schlage keyless door locks come in two versions: the deadbolt and the lever. These locks can fit in standard door lock holes, and only a screwdriver is needed to install them.
The installation of a Schlage keypad or keyless lock is similar too!
The first step is to insert the latch into the door.
Next, install the outside face of the lock you have.
Then, install the inside baseplate and attach the battery provided. Cover the interior base or mounting plate.
Finally, secure the lock on the inside using the screws in the set.
Why does my deadbolt spin?
Did you know that a locked door is the best way to keep a criminal out? It’s true. That’s why you have a deadbolt on your front door.
But what happens when your Schlage keyless door lock fails and your deadbolt just spins? You might be wondering if it is better to just get a new lock. Well, don’t worry, we’re here to help.
There are a few things that could be causing your lock to fail. Maybe the battery has died and you need to replace it. Or maybe the lock has gone out of sync and needs to be reset. If the problem persists after the reset, the lock might have been installed wrongly.
Troubleshooting a spinning Schlage keyless lock
It’s happened to the best of us. You walk up to your door, key in hand, and try to turn the knob… only to have the key spin in the lock without opening the door. What’s going on?
The most common is that the battery in your Schlage keyless lock has died, preventing it from opening. If this is the case, you can replace the battery.
Another possibility is that something is blocking the lock from turning. This could be due to dirt or debris caught in the mechanism, or a foreign object that has found its way into the keyhole.
Try using keys to remove any obstructions and see if that solves the problem.
If neither of these solutions works, it’s possible that there’s something wrong with the lock itself. In this case, you’ll need to call a locksmith to troubleshoot and fix the issue.
Defective or jammed deadbolt
Deadbolts are critical locks in smart locks. The lock can help keep your house from breaking down in an emergency by providing extra protection for your property.
Like other devices, deadbolt parts are susceptible to disengagement, being worn, or jammed. If you ignore it, then it may not work correctly. Please use these solutions to resolve this problem.
What happens when a Schlage keyless door lock code fails?
When your Schlage keyless door lock code starts to fail, there are a few things you can do.
First, try re-entering your code. If that doesn’t work, try resetting the lock by pressing the “Reset” button on the back for about five seconds. If that still doesn’t work, you may need to replace the battery.
If your key won’t turn in the door, the key may be damaged or the lock is frozen. In either case, you’ll need to call a locksmith to help you get back into your home.
How do you unlock a dead Schlage lock?
If your Schlage keyless lock has stopped working, it may be due to a dead battery.
Fortunately, getting a deadlock out of your door isn’t too difficult. First, take out the battery pack and make sure that the batteries aren’t dead – if they are, simply replace them with new ones and try again.
If that doesn’t work and there isn’t an emergency keyhole you can use to get the lock open, there is another way.
Some Schlage keyless door locks have a reset feature for when the batteries die – all you have to do is press and hold down the reset button on the front or back of the handle for about ten seconds until it shifts from “locked” to “unlocked” mode.
If this also fails, then your last resort would be to remove the entire handle from the door frame and manually work out how to disengage it from within.
Why won’t my key turn in my door?
If you’ve ever tried turning the key in your Schlage deadbolt, and it just spins, then there are likely a few things wrong. First, check the latch to make sure it’s not stuck in the locked position.
If that doesn’t work, then maybe the batteries malfunction after being changed and need replacement before they work correctly.
The good news is that when your key won’t turn in your door due to a dead battery, follow these easy steps, and you can be up and running once again in no time!
Schlage locks require a 9-volt battery to operate, so if yours has gone bad, you’ll need to replace it before you can unlock your door again.
To do this, use a small screwdriver to remove the screws around the Schlage keypad and take it off. Then you’ll be able to access the battery compartment and replace it with a new one.
Does changing the batteries make a difference?
If you’ve tried all the other steps and still haven’t been able to unlock your Schlage keyless door lock, it’s time to try changing the batteries. Low battery power is one of the most common reasons why a Schlage keyless door lock won’t work.
Over time, the batteries can corrode and cause the mechanisms inside to malfunction, so replacing them is essential.
To swap out the batteries, simply open the battery compartment located on your keypad. Once you’ve removed the old batteries, insert two new AA batteries and close up the compartment.
At this point, you should be able to open your door using your code or fob as usual.
If this doesn’t work, then it’s likely that there is an issue with something else in your lock, like a jammed keyhole or internal part that needs to be fixed or replaced by a professional locksmith.
Simple DIY repairs to fix your Schlage keyless door lock
There are a few simple DIY repairs you can try if your Schlage keyless door lock just spins.
First, check the battery. If the battery is dead, it will prevent the lock from engaging at all. Simply replace it and see if that solves the problem.
You can also check to see if there is any dirt or debris stuck inside the lock that could be preventing it from functioning properly.
If neither of these solutions helps, then it’s likely that you need to loosen and adjust the screws on your door jamb to make sure everything lines up properly. You may also need to replace some components in your lock if any have worn out over time.
What happens when Schlage battery dies?
When the battery of your Schlage keyless door lock dies, the security features of the lock will no longer be available.
The first thing you should do is find a new battery to replace the old one.
If you’re not sure what kind of battery to get, your local hardware store or home improvement center should have a variety that works with your lock.
Once you have the new battery, it’s important to make sure that it is properly installed and working correctly. To do this, take out the old battery and replace it with the new one.
Then, test the lock with a key or keep entering codes until you get a successful unlock sound. Cover the interior base or mounting plate.
Finally, secure the lock on the inside using the screws in the set.
If for some reason this doesn’t work, there may be an issue with the locking mechanism inside your Schlage door lock.
In this case, you should contact a professional locksmith for assistance in getting your lock functioning properly again.
Resetting the Schlage keyless door lock
When you’re unsure of the solution, it may be helpful to re-lock the doors.
By restarting, the lock will remove the programming code and return to the default settings. Before your system resets, verify the Schlage locks’ model and follow their user manual.
Reset buttons vary from model to model, and different appearances may differ.
Press and release the Schlage button. Reconnect the battery.
Then press and hold the Schlage button until you see a green light, and the lock beeps. This is different from other types of locks like KECKET BE4668 et BE4469 smart locks.
Consult the user manual on how to reset and troubleshoot your device. Once the code has been accepted, a green light will flash, followed by a long beep.
Conclusion
When your Schlage keyless doors lock starts to fail, it’s important to know what to do.
Don’t panic if your Schlage keyless lock starts to act up—here are a few troubleshooting tips to help you get back into your home.
If your Schlage keyless door lock battery dies, you can still unlock your door by using the keypad code.
If your key won’t turn in the door, it might be because the lock is jammed—use a butter knife or credit card to try to push the lock back into place.
If all else fails, you can always call a locksmith to help you get back into your home.
FAQ
Why does my Schlage keyless door lock just spins?
The key can be turned on without opening the cylinder.